 |
35" long 7/16" diameter slow bend with a 20° 3 1/2" kick on the tip which is sharpened on the inside of the bend for cutting glue. This tool is very ridged and comes with a T adjustable handle. (This was the tool that was used to win the International Dent Olympics in 2009 at the Mobile Tech Expo in Clear Water, Florida) A super tool being used by a lot of techs. #34SB716S20 |
 |
35" long 7/16" diameter single bend shaved flag, with a 40°, 2" kick. The tip is slightly rounded for pushing convenience. The tool is designed for both pushing and twisting. It is a very versatile tool, and comes with T adjustable handle. Designed for pushing or used for a twist tool also. #35SB716S18 |
 |
35" long 3/8" diameter with 40° bend on the 1 1/2" kick on the tip. Shaved back 7" with a slightly rounded tip for pushing or twisting (Another very versatile tool) #35SB38S19 |
 |
31" long 5/16" diameter double bend shaved tool. With a 3" kick, and a 45° blade that has a knife grind sharpened on the inside for glue cutting while accessing a dent. It comes with a T adjustable handle. It is shaved back 18" for accessing hard to reach dents. #31DB516S27 |
 |
48" long 3/8" diameter shaved back 38" with a 4 and 1/4" 45° semi sharp tip. (THIS TOOL IS COMMONLY REFERRED TO AS THE X-CALIBER) This tool has earned the reputation of being the ultimate flexible, hard driving access tool that will reach and push dents not capable from any other tool. This tool is a little costly because of the difficulty in achieving its demanding characteristics, however, it is worth every cent of the price. Some of its uses: bottom of doors, around wheel houses, front and rear, SUV 1/4 panels, up in sail panels, and many more hard to reach places that require length, flexibility and hard drive (even with a 4 and 1/4 long tip) It comes with the T adjustable handle for easy drive and control. (For the master craftsman tech that wants to get on every dent and fix it without drilling..) #48SB38S35 |
 |
57" long double bend shaved 7/16" diameter tool with an adjustable T handle that has been shaved back 26" from the 45° knife ground tip. Sharpened on the inside for cutting glue. Very stiff drive with excellent access abilities. #57DB716S25 |
 |
54" long 9/16" diameter slow bend tapered round tip, designed to accept a soft round rubber tip. The tool has a 3" kick on the tip which is tapered back 6" from the tip. This tool is extremely stiff and can be used in numerous ways. It is a good tool of choice for hail on up to the largest of dents, and can be used for both twisting or pushing. A unique and versatile tool. Comes with a T adjustable handle. #54SB916T15 |
 |
43" length 1/2" diameter slow bend tapered back 6" from tip. This tool accepts the round soft rubber tips and can be used for twisting or pushing. It is a good tool of choice for large or small damage. Comes with a T adjustable handle. #43SB12T17 |
 |
50" long 1/2" diameter slow bend tip tapered round back 6", and accepts the round ball rubber tips for moving a lot of metal. This tool is designed for both pushing and twisting and works well on any size dent. Comes with a T adjustable handle. #50SB12T16 |
 |
46" long 7/16" diameter double bend shaved. This tool has been shaved back 24" with a 45° knife bend on the tip, and a 3" kick sharpened on the inside of the tip for cutting glue and for access. It comes with a T adjustable handle. #46DB716S26 |
 |
10" long 1/4" diameter rod tapered down to 3/16 diameter with a 3/4" long 30° angle tip with a small ball tip and a T adjustable handle. #10SB14T30 |
 |
12" long 1/4" diameter shaved with a slow bend and sharpened on the inside of bend which has a 2" kick. Comes with a T adjustable handle added for versatility. (An excellent hand tool.) #12SB14S24 |
 |
12" long 5/16" diameter slow bend shaved back 9" from the tip which is shaved thin with a point, and sharpened on the inside of the bend for cutting glue. This is an ideal hand tool with a short adjustable T handle for pushing or twisting. VERSATILE- The adjustable handle also makes every tool both right and left tools. It has a 45° 1 1/2" kick slow bend tip. #12SB516S22 |
 |
12" long 1/4" diameter shaved back thin 10" with a 45° 1 and 1/2" flag. This tool is flexible for good access and hard drive. Itsells with a straight adjustable handle for convenience of a right and left tool. #12SB14S33 |
 |
10" length 1/4" diameter shaved and tapered for hard to reach dents. It comes with a straight adjustable handle for the versatility of right and left flag with perfect handle position. It has a 1 and 1/2" long flag at a 45° angle. #10SB14S34 |
 |
18" long 5/16 diameter rod with a 45° 1 1/2" semi sharp round tip. It comes with a T adjustable handle. #18SB516T29 |
 |
24" long 5/16" diameter with a slow bend shaved back 11 inches, with a thin shaved 40° 2" long slow bend tip sharpened on the inside of the bend for cutting glue, and to add to its versatility. Designed for both pushing or twisting. #24SB516S21 |
 |
26" long 5/16" tapered round on the end rod with a 45° 1 1/2" long semi sharp tip. It comes with a T adjustable handle and is the ultimate small diameter pushing tool. #26SB516T28 |
 |
26" long 3/8" diameter double bend tapered down to a small ball tip on a 80° tip with a 4" kick. An excellent push tool around corners or braces. It can also be used as a push tool because of its design and the T adjustable handle. #26DB38T38 |
 |
24" long 5/16" diameter slow bend shaved 4" long 82° bend flag, with a straight 6" long adjustable handle for perfect control and easy drive, even with one hand! (THE ULTIMATE UPPER DOOR TOOL) Most likely the #1 selling PDR tool in the world in the last year and a half. READ THE REVIEWS ON THIS TOOL. I personally have seen techs pay for this tool in less than 4 minutes of viewing, while I was making out the ticket for it. It comes with a customer satisfaction guarantee. #24SB516S36 |
 |
24" long 1/4" diameter shaved back 14" with a slow 40° 2" slow bend sharpened on the inside for cutting glue, and flexible with hard drive and access. It comes with a straight adjustable handle with 30 positions for a perfect handle positing. (A super shaved thin hard driving access tool) #24SB14S23 |
 |
24" long 1/4"diameter thin shaved access flag tool with a 40° 1 1/2" kick on the tip. A super access tool, thin and flexible with good drive. Comes with a straight adjustable handle for perfect handle position and the versatility of right and left flag all in one tool. #24SB14S32 |
 |
21" long 5/16" diameter double bend shaved J upper brace hook tool with an adjustable straight handle that makes it a right and left tool. This is the only upper brace tool that will reach around the door mirror clear up to the front edge of the door. It is shaved thin for access while retaining it hard driving capabilities. From the bottom of the hook to the tip is 4". Designed by techs for techs. #21DBS516S37 |
 |
Set of 2 18" long 1/4" diameter double bend flags with a sharp tip turned up 15° and shaved back to the bend in the middle of the shaft. Designed for access and drive. #18DB14S77
|
 |
Set of 2 14" long 3/16" diameter double bend flags, with a 15° raised sharp tip. Flag tipped up 15° for improved drive, and handle movement, and access. Set handles are color coded to distinguish right from left. #14DB316S78 |
