Set of 2 18" long 1/4" diameter double bend flags with a sharp tip turned up 15° and shaved back to the bend in the middle of the shaft. Designed for access and drive. 18DB14S77s

Set of 2 24" double bend 5/16" diameter flags with a sharp shaved tip turned up 15° and shaved back to the bend in the middle of the shaft. An excellent access tool with extreme drive and access. 24DB516S76s

48" long 3/8" diameter shaved back 38" with a 4 and 1/4" 45° semi sharp tip. (THIS TOOL IS COMMONLY REFERRED TO AS THE X-CALIBER) This tool has earned the reputation of being the ultimate flexible, hard driving access tool that will reach and push dents not capable from any other tool. This tool is a little costly because of the difficulty in achieving its demanding characteristics, however, it is worth every cent of the price. Some of its uses: bottom of doors, around wheel houses, front and rear, SUV 1/4 panels, up in sail panels, and many more hard to reach places that require length, flexibility and hard drive (even with a 4 and 1/4 long tip) It comes with the T adjustable handle for easy drive and control. (For the master craftsman tech that wants to get on every dent and fix it without drilling..) 48SB38S35

24" long 5/16" diameter slow bend shaved 4" long 82° bend flag, with a straight 6" long adjustable handle for perfect control and easy drive, even with one hand! (THE ULTIMATE UPPER DOOR TOOL) Most likely the #1 selling PDR tool in the world in the last year and a half. READ THE REVIEWS ON THIS TOOL. I personally have seen techs pay for this tool in less than 4 minutes of viewing, while I was making out the ticket for it. It comes with a customer satisfaction guarantee.24" long 5/16" diameter slow bend shaved 4" long 82° bend flag, with a straight 6" long adjustable handle for perfect control and easy drive, even with one hand! (THE ULTIMATE UPPER DOOR TOOL) Most likely the #1 selling PDR tool in the world in the last year and a half. READ THE REVIEWS ON THIS TOOL. I personally have seen techs pay for this tool in less than 4 minutes of viewing, while I was making out the ticket for it. It comes with a customer satisfaction guarantee. 24SB516S36

21" 5/16" diameter triple bend shaved buddy tool with a T adjustable handle and a 4 1/4" kick to a sharp point tip. This tool has enough sweep on the tip to push well on doors where the outer skin bubbles out away from the glass, and has the T adjustable handle designed for both pushing, and twisting. THIS IS AN EXCELLENT TOOL FOR MANY SITUATIONS. (BUDDY TOOL) 21TB516S47

22" long 3/8" diameter with a slow tapered and shaed bend with a 5 1/2 thro that tapers and shaves down to a small round tip. This tool is an excellent access tool for pushing or twisting on those hard to reach dents. It can be ordered with a regular fixed handle, but becomes more versatile with an adjustable T handle. A hard driving too with a long thro.

30" 1/2" diameter double bend shaved rod designed to both push or twist. It comes with a soft round tip. 30DB12S14

35" long 7/16" diameter slow bend with a 20° 3 1/2" kick on the tip, which is sharpened on the inside of the bend for cutting glue. This tool is very ridged, and comes with a standard T handle in this set. (This is the tool that was used to win the International Dent Olympics of 2009 at the Mobile Tech Expo in Clear Water, Florida) A super tool that is being used by a lot of techs. 34SB716S20F (special order with standard T at the set price)

This is a new tool, description coming soon.

53" 9/16" diameter slow single bend shaved back 12" to a very desirable thickness. This rod comes with a very sharp tip for shrinking large stretched dents, but can be ground, or filed to softer tip very easily. It works extremely well for roofs, 1/4 panels, fenders, under roof braces as a twist tool,and tight places around wheel houses front or rear. A very unique tool with versatility. 53SB9/16S08

19" 2 1/4" 90° sharp tip flag. This tool comes with a standard T handle and a long 2 1/4" reach sharp tip. 19SB316S72

20" long 1/4" diameter shaved back 16" with 1 3/4" 75° flag. This tool is a must for access and hard drive. Works especially well in the nose of many hoods. It is shaved thin and is very flexible with good drive. 20SB14S69

24" long 3/8" diameter shaved very thin 12" back, with a 3 and 1/2" kick, and comes in a med knife grind. An excellent double bend shaved tool with access, and drive. 24DB38S56

36" 1/4" diameter shaved thin back 24" with a 2 1/8" 75° flag. This tool is designed to go between the waffle panel and the outer skin on aluminum hoods, however it will work many other places like middle door braces. It is a very flexible tool with hard drive that will work in many places where a small diameter shaved flexible tool is necessary. Behind middle door braces, hard to access 1/4 panels, fenders, and much more. A great and necessary tool for every tool cart. This tool is a must for no drill dent repair. 36SB14S68

29" long slow 45° bend, thin shaved with a sharp tip. It comes with a welded regular T handle but would work really great with a T adjustable handle also. 29SB38S51

18" long 5/16" diameter tapered 45° degree 2" long small ball tip. This is a favorite small diameter rod for many techs with great drive and sized for accessing through small holes and places that require small diameter tools. Plenty of pushing power, and a highly recommended tool. 24SB516T91

A specialty tool, description coming soon.

A specialty tool, description coming soon.

13" long 1/4" diameter double bend round tapered small round tip. The photo says it all. Very nice, and handy too. 13DB14T61

3" long 3/16" diameter 1" 45° sharp tip flag for those difficult to reach dents. 13SB316S74

8" long 3/16" diameter 90 deg flag with a 90° 1" long flag, with a T universal flag. Good for those close dents. It can be used for pushing or twisting, and works both right or left. 8SB316S75

Set of 2 14" long 3/16" diameter double bend flags, with a 15° raised sharp tip. Flag tipped up 15° for improved drive, and handle movement, and access. Set handles are color coded to distinguish right from left. 14DB316S78s

13" long 90° bend 3/16" diameter. flag with a sharp tip on a 1&3/4 length flag. It also has a regular pistol grip handle that is parallel to the tip making it a universal right and left tool. 13SB14S73